First-time setup

Follow these steps in order the first time. You can finish in a few minutes.

1. Enable and choose a mode

1. Open System > Plugins > System - Easy WCAG.
2. Leave Mode as Fix for production, or choose Report only while you inspect.
3. Save.

2. Turn on the Super User debug panel (recommended)

1. Set Super User debug panel to Yes.
2. Log in to the frontend as Super Administrator.
3. Visit any page. A panel lists Fixed, Checklist, Needs review, and Switched off. Visitors never see it.

3. Confirm skip targets (optional)

1. View source on a typical article and find the main content id.
2. If it is not #sp-main, #main, #content, or #sp-component, add it to Skip targets.

4. Check the front end

1. Open any public page.
2. View source for an HTML comment such as Easy WCAG (fix): FIXED ...; REPORT ....
3. If something looks old, clear cache and hard-refresh (Ctrl+F5).

Student tip

Turn on Mark fixes while testing so changed tags are easier to spot. Turn it off on production unless you still need it.